全職奶爸

Risk Reward Ratio: Formula, Calculator and Trading Examples

Risk reward ratio: formula and realised R

SMC foundations · Trade planning · By Yang

A trade can offer a 1:3 risk reward ratio and still lose money over a series of attempts. The ratio tells you the size of the planned win compared with the planned loss. Your fills, costs, exit decisions and frequency of winning trades determine what ends up in the trading record.

Risk reward ratio compares the distance from entry to stop with the distance from entry to target. Risking $100 to aim for $300 is 1:3 risk:reward. The reward divided by risk is 3, often called a 3R target. Neither number gives you the probability of reaching that target.

Use the calculator to check a trade, then compare its assumptions with the worked examples. All prices, fees and outcomes below are hypothetical; they are not trade recommendations or personal performance results.

Risk reward ratio calculator

Enter the prices in the same units your chart uses. Quantity is the number of shares or contracts. If you have a fixed loss budget, use the position sizing calculator to derive that quantity before comparing the stop and target. Dollar value per price unit converts a one-unit price change into money for one share or contract. For a share quoted in dollars, enter 1. For another instrument, use its actual contract specification and account-currency conversion.

Default example before costs: risk $100, reward $300, risk:reward 1:3. With $10 total costs: loss $110, win $290 and break-even 27.50% under the two-outcome model.

Hypothetical arithmetic only. Inputs stay on this page; nothing is submitted. No order is placed.

Total round-trip cost means the estimated cost of the whole position from entry through exit. If your schedule lists a fee per contract per side, multiply by quantity and by both sides before entering it. Include spread and execution assumptions once, rather than counting a spread in both the entry price and this cost field.

The calculator assumes one full exit at either the target or stop, a linear price-to-money relationship and the same entered cost for each outcome. It does not value options, model changing exchange rates, predict fills or simulate partial exits. If those assumptions differ from your trade, calculate each actual cash flow separately.

Risk reward ratio formula for long and short trades

For a long position, the stop belongs below entry and the target above it. Subtract the stop from entry to get price risk. Subtract entry from target to get the planned price reward. A long entry at 100 with a stop at 98 and target at 106 therefore risks 2 price units to seek 6. For a volatility-based distance, the ATR stop-loss examples show how to turn a measured range into a valid order price before comparing the payoff.

Long: risk = entry − stop. Reward = target − entry. Divide reward by risk: 6 ÷ 2 = 3. Write the result as 1:3 when risk comes first. Multiplying both distances by the same quantity and dollar multiplier leaves that gross ratio unchanged.

For a short position, the direction reverses. A short entry at 100, stop at 102 and target at 94 also risks 2 units to seek 6. The short position benefits from the price falling, so its reward calculation subtracts target from entry.

Short: risk = stop − entry. Reward = entry − target. A stop on the wrong side of entry cannot be repaired by taking the absolute value and reporting an attractive ratio. Check the order direction, the intended invalidation level and the target first.

To convert price distances into money, multiply each distance by quantity and dollar value per price unit. In the long example, 50 shares produce $100 of planned price risk and $300 of planned gross reward. The gross ratio remains 1:3. With an estimated $10 whole-trade cost, the losing outcome becomes −$110 and the winning outcome +$290.

That last calculation assumes the planned prices fill. An exit at a worse price changes the result. Keep planned risk and actual loss in separate fields so that an execution difference remains visible when you review the trade.

Read 1:3, 3:1 and 0.33 without reversing the trade

The same trade can appear under several conventions. Risk:reward of 1:3 means risk one to seek three. Reward:risk of 3:1 describes the same amounts. Risk divided by reward gives 1 ÷ 3, or about 0.33. Reward divided by risk gives 3.

Look at the labels before comparing screenshots, calculators or trading rules. A statement that a ratio should be “above one” is ambiguous until you know the numerator. In this guide, colon notation always puts risk first, while the single R multiple puts reward over initial risk.

The shorthand “1/3” can also cause confusion. If someone means risk one to seek three, write 1:3 in the journal. If they mean a mathematical fraction, 1/3 is approximately 0.333. A labelled entry such as “planned target: +3R” is easier to audit later than an unexplained decimal.

R also needs a fixed dollar definition. If initial price risk is $100, then +$150 is +1.5R before costs and −$120 is −1.2R. Define whether your journal uses gross initial price risk or a cost-inclusive risk budget as its denominator, then preserve that convention throughout the sample.

The anti-Martingale position sizing guide keeps that distinction explicit: changing the dollars at risk changes the dollar outcome, while the trade’s price ratio remains the same. Its complete three-trade example compares all eight hypothetical win-loss paths.

Risk reward ratio and break-even win rate

Consider a simplified strategy in which every winner makes exactly W dollars and every loser loses exactly L dollars. If p is its win rate, average result per trade is p × W − (1 − p) × L. Setting that result to zero gives the break-even win rate: L ÷ (W + L).

For a gross 1:2 payoff with $100 losses and $200 wins, that is 100 ÷ 300 = 33.33%. The strategy needs more than that percentage to have a positive average under these assumptions. At exactly one-third winners, the gross wins merely offset the gross losses.

Gross risk:rewardGross win / lossBefore costsWith $10 cost per trade
1:0.5+$50 / −$10066.67%73.33%
1:1+$100 / −$10050.00%55.00%
1:1.5+$150 / −$10040.00%44.00%
1:2+$200 / −$10033.33%36.67%
1:3+$300 / −$10025.00%27.50%
1:4+$400 / −$10020.00%22.00%

The final column uses net win = gross win − $10 and net loss magnitude = $100 + $10. For 1:3, that is $110 ÷ ($290 + $110) = 27.5%. The $10 is an assumed cost for the entire trade, not a quoted broker fee. Different charges or execution outcomes require different inputs.

A break-even threshold is not a forecast of your win rate. Moving a target from 2R to 4R reduces the binary model’s required win rate, but it also changes which trades count as winners. Recalculate the actual outcomes using the new exit rule before deciding that the change improves the strategy.

Use realised average wins and losses to calculate expectancy

A planned 3R target does not mean that your average winner is 3R. You might exit early, scale out or close at the end of a session. Stops can slip, and a loss closed manually may differ from the original stop amount. Use the amounts in the record when calculating historical expectancy.

Suppose a hypothetical sample contains 40 winners averaging +$180 and 60 losers averaging −$100, with both averages already net of costs. Total net result is 40 × $180 − 60 × $100 = $1,200. Average result is $12 per trade. The corresponding calculation is 0.40 × $180 − 0.60 × $100.

If those same 40 winners average only $130, the result becomes $5,200 − $6,000 = −$800. The win rate is unchanged. The average amount collected on winners changed enough to reverse the sample’s outcome.

Record zero-profit exits separately when using a journal with more than two outcome categories. A three-outcome calculation can weight the mean result of winners, losers and scratches by their respective proportions. An entry-price exit with commissions is a small net loss, even if the charting platform labels its gross result as breakeven.

The prop firm trading journal gives you a place to keep entry assumptions alongside actual results. Preserve unfilled setups and rule violations as separate observations; including an imaginary target hit from an order that never filled distorts the sample.

How partial exits change your realised R

Suppose a two-unit position has $100 total initial price risk. Each unit therefore represents half of that initial risk. You close one unit at +2R relative to its own entry-to-stop distance and the remaining unit at entry. The whole position earns +1R gross: half × 2R plus half × 0R.

Partial exits use the original position as the denominatorHypothetical two-unit trade, total initial risk100 dollars. Half closes at plus2R and contributes plus1R to the whole position. The remaining half at entry gives whole-trade plus1R; at minus1R stop gives plus0.5R; at plus3R target gives plus2.5R, all before costs.Half at +2R does not earn +2R on the whole tradeHypothetical · Initial position risk: $100 · Before costsFirst half: 50% × 2R = +1R on the whole positionKeep the original $100 denominator for every exit.Other half at entry1R + (50% × 0R)= +1R / +$100Other half at stop1R + (50% × −1R)= +0.5R / +$50Other half at +3R1R + (50% × 3R)= +2.5R / +$250Deduct actual fees and execution differences after weighting the exits.
Each exit contributes its share of the original position. All three outcomes use the same initial $100 risk.

If the remaining half instead reaches the original −1R stop, the whole-trade result is +0.5R gross. The first half contributes +1R to the whole position, and the second contributes −0.5R. If that remaining half reaches +3R, the combined result is +2.5R gross.

These are weighted results, not a recommendation for one exit method. Taking a partial profit changes the distribution of outcomes. It can reduce the amount collected on a full trend while changing what happens when the remaining position reverses. Compare all trades under each complete exit rule, including costs and the quantity needed to make the partial exit possible.

Keep the initial R denominator fixed while evaluating the trade. Moving the stop to entry does not make initial risk zero or make the return infinite. The initial risk records what you committed at entry; the revised protective order describes current exposure. Both can be useful, but they answer different questions.

Choose a feasible target before judging the ratio

A target needs a reason to exist at that price. In an SMC study, it might be a previously identified swing or liquidity reference. In another method it might be a range boundary or a tested volatility-based exit. Select the target using the method’s rules before deciding whether the available payoff fits.

Imagine a long entry at 100 with invalidation at 98. A visible resistance area at 103.5 leaves 3.5 units of reward against 2 units of risk, or 1:1.75. Writing a target at 106 creates a mathematical 1:3 ratio, but the arithmetic alone supplies no reason to expect price to clear that resistance.

You can wait for a different entry if your rules permit it. An entry at 99.5 with the same 98 stop and 103.5 target gives 4 ÷ 1.5 = 2.67R gross. That order might not fill. Record the missed trade as unfilled if price leaves without reaching it; counting it as a 2.67R winner would assume an entry you never had.

A late entry changes the same setup in the opposite direction. Buying at 101 while keeping the 98 stop and 103.5 target leaves 2.5 units of reward against 3 units of risk, about 0.83R. Recalculate from the executable entry rather than carrying forward the attractive ratio from an earlier screenshot.

The SMC foundations guide explains how to define a study model’s structure and liquidity references. For zone-based targets, the support and resistance guide covers boundaries, confirmation and invalidation. Keep the entry model consistent when comparing payoff ratios.

A tighter stop changes the trade you are testing

With entry at 100 and target at 106, moving the stop from 98 to 99 changes planned reward over risk from 3R to 6R. It also changes the price path that survives. A trade that dips to 98.5 before reaching 106 survives the first stop and loses under the second.

That example explains why the ratio can improve while the result worsens. A tighter stop may be appropriate under a different entry rule, but compare that full rule on the same historical period. Keep the stop’s relationship to invalidation visible instead of choosing its distance solely to produce a larger number.

If the valid stop is wider than your dollar budget permits, reduce quantity. For example, a generic linear contract worth $5 per price unit with a 4-unit stop has $20 price risk per contract. Four contracts use $80 before costs. An 8-unit stop uses $40 per contract, so two contracts give the same $80 price risk.

Fees and minimum quantity can prevent an exact match. When the smallest tradable size exceeds the budget, the planned trade does not fit that budget. For actual Nasdaq futures multipliers and whole-contract sizing, use the MNQ versus NQ comparison; the generic $5 contract here is only a mathematical example.

Planned stop risk and execution risk

A stop level is an instruction within an execution process. For stock stop orders, the SEC’s order-type bulletin explains that the trigger activates a market order and does not guarantee its execution price. A stop-limit order adds a price limit, with the possibility that the exit remains unfilled.

Check your actual instrument, broker and platform’s order rules. Product-specific protections, trigger methods and trading interruptions matter. A calculator using one stop price cannot reproduce those conditions, and a hypothetical cost reserve cannot put a ceiling on an unexpected loss.

When reviewing trades, record the planned stop price, actual exit price and fees separately. If the plan was −$100 and the actual result −$118, preserve that difference. Replacing the actual loss with −1R conceals the very execution issue the journal should help you investigate.

Compare order choices through their outcomes. A market exit prioritises obtaining a fill at available prices; a limit constrains acceptable execution prices and may leave exposure open. The appropriate choice depends on the instrument and trading method. Neither choice makes a planned reward certain.

Fit the trade to available account loss room

Risk reward ratio does not tell you whether a position fits an account’s loss boundaries. Imagine an account with $1,200 of current room above a fixed floor and no other positions. A trade with $100 of planned price risk and $10 estimated cost consumes $110 of that room if it exits as assumed.

Ten consecutive losses of exactly $110 leave $100 of room. An eleventh identical loss would pass the fixed floor. That is arithmetic under fixed assumptions, not permission to take ten losses: a daily boundary, fees already owed, other positions, slippage or a moving floor can make the usable amount smaller.

A larger target does not enlarge that available room. Changing the target from 2R to 5R leaves the planned losing outcome at $110 in this example. The account must survive the actual path before any eventual target matters.

For a moving floor, consult the trailing versus static drawdown guide. Keep that floor calculation separate from R. A high unrealised gain can affect available room under some structures even if the trade later closes near entry; the exact treatment comes from the selected plan’s current rules.

CME’s trade-plan lesson treats per-trade loss, daily loss and overall exposure as distinct planning parameters. Its 2% lesson also calls that percentage an arbitrary threshold. Applying a percentage to a prop account’s advertised label can therefore produce a poor match with its actual loss room.

Compare HDP discounts

Lucid 30% · Tradeify 30% · TPT 50%.

See current offers ↗

Eligible partner plans only.

Some links are affiliate links. Yang may receive a commission without an additional charge to you.

Review the complete exit rule before changing the target

Choose a specific instrument, session and entry definition for the comparison. Freeze the target, stop, partial exits and cancellation rules before checking a later sample. Otherwise, changing each losing trade after seeing its result produces a method that was never available in real time.

For each filled trade, save the planned entry, stop, target and initial dollar risk, then the actual fills, quantity changes and net result. Review average win, average loss, scratches, total costs and the largest drawdown alongside win rate. A strategy with a positive historical mean can still have a losing sequence that exceeds the available account room.

Use a separate later period or forward simulation to see whether the frozen rules remain executable. Review how often the intended entry was missed and whether limit fills were realistic. A positive replay sample establishes what happened under those assumptions; it does not guarantee future returns.

Risk reward ratio FAQ

What is a risk reward ratio?

It compares a trade’s planned loss distance with its planned gain distance. Risk:reward of 1:3 means risking one unit to seek three. It describes payoff size, not the probability of winning.

How do you calculate risk reward ratio?

For a long trade, subtract stop from entry for risk and entry from target for reward. Divide reward by risk to obtain the target R multiple. Reverse the price subtractions for a short trade, then apply quantity, instrument value and costs.

Is a 1:3 risk reward ratio good?

It can fit a tested strategy, but it supplies no automatic edge. Under exact +3R/−1R outcomes, break-even is 25% before costs. Actual average wins, losses, costs and account constraints determine whether it works in practice.

What does a 1.5 risk reward ratio mean?

Check the convention. A reward-over-risk value of 1.5 means seeking 1.5 units per unit risked, written 1:1.5 risk:reward here. A risk-over-reward decimal of 1.5 describes a different payoff.

What is the best risk reward ratio for day trading?

There is no universal best ratio. Compare feasible targets and their realised outcomes under one defined method, including fees, slippage and missed entries. A larger target can lower the required win rate while also changing which trades win.

Can a 1:1 ratio be profitable?

Under equal gross wins and losses, more than 50% winners are needed before costs. Costs raise that threshold. Use the actual net win and loss amounts rather than assuming every exit occurs exactly at its planned level.

Does 1:2 require a 33% win rate?

Exact +2R/−1R outcomes break even at one-third winners before costs, approximately 33.33%. A positive average requires more. With $200 gross wins, $100 gross losses and $10 cost on every trade, break-even rises to 36.67%.

Does increasing quantity improve the ratio?

Increasing quantity multiplies both gross reward and risk by the same amount, leaving their ratio unchanged. Fees, execution and account limits can affect the net result, so larger quantity still requires a separate risk-budget check.

How do partial profits affect R?

Weight each exit by its share of the original position. Closing half at +2R and half at entry gives +1R for the whole trade before costs. Keep the initial risk denominator fixed throughout the calculation.

Is moving the stop to entry a risk-free trade?

An entry-price exit can still incur fees and an execution difference. Keep initial R fixed for the journal and calculate the actual net outcome. The new stop instruction does not guarantee an exit at entry.

Does margin equal the risk on the trade?

Margin supports a position; planned stop risk comes from price distance, instrument value and quantity. Calculate available account loss room separately. A change in required margin does not by itself change the instrument’s price multiplier.

Can I use this calculator for forex?

Only when you provide a correct linear dollar value per price unit for the position and account currency. Pip conventions, quote-currency conversion, spread and broker specifications matter. If the value changes, calculate the cash flows with the appropriate conversion.

Can I calculate the ratio in Excel?

Yes. For a long trade, use =(target-entry)/(entry-stop) for gross reward over risk, after validating stop below entry and target above it. For cost-aware break-even, divide net loss magnitude by net win plus net loss magnitude.

Does a high win rate guarantee profits?

No. Ninety wins of $1 and ten losses of $10 total −$10 before costs. Assess win frequency together with realised average win, realised average loss and all charges.