A 30-point stop costs $600 on one NQ contract and $60 on one MNQ contract, before fees and execution differences. That is the useful starting point for an MNQ vs NQ comparison. The chart can look almost identical while the money at risk changes by a factor of ten.
MNQ gives you smaller position increments and more ways to take partial exits. NQ can cost less in commissions at the same total exposure. Choose the size that fits your stop and the account’s remaining loss room, then compare what you keep after trading costs.
If you are trading through a funded program, the prop firm introduction explains the difference between evaluations, simulated funded accounts and live trading. A $50,000 account label alone tells you very little about how much NQ exposure fits.
MNQ vs NQ: contract size, tick value and point value
NQ is the E-mini Nasdaq-100 futures contract; MNQ is the Micro E-mini version. Both reference the Nasdaq-100 index. The contract multiplier converts an index-point move into a dollar gain or loss. For NQ, multiply points by $20 per contract. For MNQ, multiply points by $2 per contract.
| Specification | MNQ | NQ | What it changes |
|---|---|---|---|
| Contract name | Micro E-mini Nasdaq-100 | E-mini Nasdaq-100 | Same underlying index |
| Value of one index point | $2 per contract | $20 per contract | Dollar exposure per point |
| Minimum outright price increment | 0.25 points | 0.25 points | Four ticks per index point |
| Value of one tick | $0.50 per contract | $5 per contract | Dollar result of a one-tick move |
| 30-point adverse move | $60 per contract | $600 per contract | Gross price loss before costs |
| Equivalent gross point exposure | 10 contracts | 1 contract | Both produce $20 per point |
The CME MNQ specifications and NQ specifications establish these multipliers and tick increments. A point is a price unit; a tick is the minimum outright price step. A move from 22,000.00 to 22,000.25 is one tick. A move to 22,001.00 is one point, or four ticks.
At a hypothetical index-futures price of 22,000, one MNQ has $44,000 of notional exposure and one NQ has $440,000. Those figures describe the position’s face value. The money needed to open it and the amount you intend to risk are separate calculations.
Calculate a long or short trade in dollars
For a long position, gross P&L equals exit price minus entry price, multiplied by dollars per point and the number of contracts. For a short position, reverse the subtraction: entry price minus exit price. Fees are then deducted from the result.
Suppose you buy two MNQ at 22,000 and sell both at 22,012.50. The favorable move is 12.5 points. Gross profit is 12.5 × $2 × 2 = $50. One NQ over that same move produces $250, because it carries five times the exposure of two MNQ.
Now suppose you sell three MNQ at 22,020 and buy them back at 22,005. The 15-point favorable move produces 15 × $2 × 3 = $90 gross profit. If you buy them back at 22,035 instead, the same position loses $90 before costs. The short calculation does not require a different tick value.
Use actual average entry and exit fills when reviewing a trade. If those fills already include an adverse execution difference, it is already reflected in the price result. Deduct the applicable commissions and fees separately; adding the same execution difference again would overstate the cost.
Margin does not add another multiplier to these calculations. A lower intraday margin requirement lets you open exposure with less deposited money, but a 15-point move on three MNQ still represents $90. The resulting percentage gain or loss on your deposited capital can be large because that capital is small relative to the exposure.
Choose contracts from the stop and the loss budget
Start with the price where your trade idea fails. Measure the distance from the planned entry to that stop, then convert it into dollars. Adjusting the contract count preserves the strategy’s stop location. Moving a stop closer just to squeeze NQ into the budget changes the trade you intended to take.
Consider a hypothetical $150 maximum planned loss and a 30-point stop. One NQ already represents $600 of price risk, so it does not fit. One MNQ represents $60; two represent $120; three represent $180. Before costs, two MNQ are the largest whole-contract position within that budget.
For a concrete fee example, Tradeify’s current published round-trip rate is $1.82 per MNQ contract. Suppose you also allow a hypothetical one-point adverse execution reserve, worth $2 per MNQ. Each contract then uses $60 + $1.82 + $2 = $63.82 of planned risk. Two use $127.64, leaving $22.36 inside the assumed budget. Three use $191.46 and exceed it.
This reserve is a planning assumption, not a quoted spread or a guaranteed worst fill. Fast markets and gaps can produce a larger loss. A stop order helps define the intended exit; the available execution price still matters.
The general sizing calculation is: whole contracts = round down [trade loss budget ÷ (stop points × dollars per point + round-trip fees + assumed execution reserve per contract)]. If the answer is zero, that contract does not fit the proposed trade. You can use a smaller eligible instrument or practice the setup without risking that amount.
Use the position sizing calculator with fees and quantity limits to apply a chosen budget, contract value and permitted increment.
Keep entry quality separate from position size. Use the risk reward ratio calculator to compare the stop and target after including estimated whole-trade costs. A smaller contract makes the dollar increments finer. It does not turn a weak setup into a profitable one, or make repeated losses harmless. Record the setup, stop distance and actual costs so the size decision can be checked against completed trades.
Compare fees at the same total exposure
One MNQ is cheaper per completed contract than one NQ in the example below. Ten MNQ, however, create the same gross dollar-per-point exposure as one NQ and incur ten micro-contract fees. That is the comparison to make when deciding whether flexibility is worth the added commission.
Tradeify’s pricing reference lists $1.82 per MNQ and $5.76 per NQ, each per contract for the full open-and-close trade. These are program-specific figures checked on October 27, 2026. Use your own applicable schedule when trading somewhere else.
| Hypothetical completed trade | Dollar exposure per point | Gross profit on +10 points | Round-trip fees | After listed fees |
|---|---|---|---|---|
| 1 MNQ | $2 | $20 | $1.82 | $18.18 |
| 10 MNQ | $20 | $200 | $18.20 | $181.80 |
| 1 NQ | $20 | $200 | $5.76 | $194.24 |
The matched-exposure fee difference is $12.44 per completed trade. With twenty such trades, it would be $248.80. That arithmetic assumes all ten micros complete each round trip and the listed schedule applies. It excludes execution differences, fixed subscriptions and any other applicable charges.
Fees matter especially when the expected gross move is small. At this schedule, one MNQ needs more than 3.64 ticks of favorable movement to cover its $1.82 fee. Since outright prices move in whole ticks, four ticks, or one point, produce $2 gross and $0.18 after that fee. One NQ needs more than 1.152 ticks; two ticks produce $10 gross and $4.24 after its $5.76 fee.
These are fee-only thresholds, not complete trading break-even estimates. Spread and slippage can consume more of the result. Use your recorded fills to evaluate the full outcome. The Tradeify review covers the program’s other costs and account choices, which belong in the purchase decision rather than being hidden inside a per-trade commission number.
Use the account’s remaining loss room
A funded program may label an account 50K while allowing much less than $50,000 of losses. For the position decision, read the current equity, the active maximum-loss floor and any daily loss boundary. Also check how those values update and whether open P&L and fees count toward a breach.
Here is a hypothetical account with $50,100 of current equity and an active floor at $49,800. It has $300 of room to that floor. If the day’s remaining loss allowance is $200 and your own per-trade budget is $150, the smaller $150 budget governs the proposed trade. You still need room for execution uncertainty and any other open positions.
The two-MNQ example above uses an estimated $127.64. One NQ at the same 30-point stop uses $600 before costs, exceeding both the trade budget and the remaining floor room. A platform allowing that order size would not change the arithmetic.
For an intraday trailing floor, an open profit can raise the floor while you hold the trade. If that profit reverses, the room below current equity can shrink. With an EOD rule, the reference can update at a qualifying session close while the resulting floor still applies during the following session. Read the actual plan’s calculation before treating either model as spare risk capacity.
The Lucid Trading review compares its account routes and explains the practical effect of EOD limits. Your contract choice also needs a new check after a payout reduces equity or a scaling rule changes the permitted position. Passing an evaluation does not automatically make one NQ fit the next stage.
Partial exits are the practical advantage of MNQ
With one NQ, you can hold that contract or close it. Ten MNQ let you close part of the same starting gross exposure. For example, you could close five at a 10-point gain and the remaining five at a 20-point gain. Before costs, the result would be $100 + $200 = $300.
That example illustrates flexibility, not a superior exit strategy. Closing one NQ at a 15-point gain would also produce $300 gross, with a different exit time and fewer contract fees. A partial exit can reduce what remains exposed, but it can also cut the profit captured if the entire move continues.
The flexibility can still be useful when your plan calls for a small first exit and a runner. You can test that plan at three MNQ, for example, closing one and keeping two. You do not need to start with ten micros merely because ten equal one mini.
Adding contracts requires a fresh risk calculation too. If you add at a worse entry while keeping the same stop, total risk increases. Write down each entry, quantity and stop rather than estimating the position from its latest price alone. A protective stop on the original contracts does not automatically account for newly added contracts.
Why the NQ and MNQ charts can differ
NQ and MNQ track the same underlying index, so their broad direction should be closely related. They trade as separate futures contracts with their own transactions and order books. A last-traded price, a candle wick or a fill on one market can differ from the other. For the S&P 500 pair, the MES vs ES comparison applies the same sizing method to its $5 and $50 point values, with an example that includes trading costs.
Before interpreting a difference, compare the same expiry month, timestamps, session settings and candle type. Then check whether both feeds are live or delayed. A continuous contract with historical price adjustment can also look different from a specific dated contract around a rollover.
If you analyze NQ and execute MNQ, calculate the order’s dollars from MNQ’s multiplier. Check the actual MNQ entry and protective orders after execution. A price level selected on an NQ chart is a reference; the MNQ order must still be valid for its own prices and minimum tick.
Volume needs the same care. Ten MNQ traded contracts represent approximately the same point exposure as one NQ contract at a comparable price. Raw contract volume alone therefore cannot tell you which market transferred more dollar exposure. It also cannot tell you the quantity available at your exact stop or entry price.
For an execution comparison, record the relevant session, expiry, order size and actual fills. A single delayed exit does not establish a permanent liquidity ranking. For an order-flow signal, keep the data source consistent through the test so a change in feed is not mistaken for a change in the strategy.
Check the contract behind a continuous chart
On TradingView, symbols such as NQ1! and MNQ1! join contracts into continuous price histories. A dated contract identifies a particular expiry. When comparing the two instruments, confirm which underlying contract the chart currently represents and which contract the order panel will use.
TradingView supports trading 1! continuous contracts for CME and EUREX futures, with the order routed to the front contract currently included in the series. The resolved contract is shown in the order panel, DOM and supported instant-order controls. Trading through 2! continuous contracts is unavailable.
Your connected broker or program must also support the intended instrument. Before submitting, confirm the product, expiry, quantity, account and dollar risk in the order ticket. At rollover, inspect existing orders and positions separately from the chart display; changing the chart does not by itself close a position you already hold.
If you copy an NQ signal into MNQ, establish the intended dollar exposure first and then check the copier’s actual symbol mapping and quantity behavior. Software can handle ratios and rounding differently. The prop firm copy trading guide covers the permission and account checks; this comparison does not assume any particular copier has been configured.
Separate margin, maximum contracts and trading costs
In a personal brokerage account, the broker’s intraday, initial and maintenance margin requirements can differ. They can also change with market conditions or holding periods. Check the current requirement for your contract and session, together with the broker’s liquidation policy.
A funded evaluation may instead give you a simulated balance, a maximum position size and loss rules. Its permitted micros-to-minis ratio is an account rule. Verify whether mixed positions share one combined limit, whether scaling applies and whether the funded stage uses a different cap.
A maximum of ten micros is permission to open up to that size under the plan’s rules. It does not establish that ten MNQ fit a 30-point stop. Your own loss calculation can produce a smaller number, including zero. The same distinction applies when the order ticket shows sufficient buying power.
Trading availability and holding permission also require separate checks. Read the exchange schedule for the product and the program’s required closing time, news restrictions and holiday notices. An exchange session remaining open does not extend a firm’s permitted holding window.
For the clock and calendar check, see the futures trading hours guide. It separates the normal index session, holiday changes and account holding deadlines, with Chicago, New York and Taiwan time examples.
Keep the account purchase, optional data services and ongoing platform charges in a separate budget. They affect the total cost of participating, but deducting a monthly subscription on every completed trade would misstate the commission comparison unless you deliberately allocate that cost across a defined trading sample.
Decide whether switching to NQ improves the plan
NQ becomes worth comparing when your normal stop, contract quantity and execution allowance fit your current loss budget, and the commission saving matters at the exposure you actually trade. That decision can change from one setup to another because stop distances change.
Review a consistent sample of trades using the same entries and exit rules. Compare gross results, per-contract fees, actual execution differences and the largest adverse excursion. Then test whether one NQ would have exceeded the account boundary at any point. A good closing result alone can hide a position that crossed a rule during the trade.
If your strategy needs two partial exits from a position smaller than one NQ, MNQ can remain the useful instrument even after the account grows. If you always enter and exit ten MNQ together, the fee comparison with one NQ becomes more relevant. The trade structure should explain the contract choice.
Before the next order, write down the instrument, expiry, stop distance, quantity, full round-trip fee, assumed execution reserve and room to each active loss boundary. If those numbers fit, you have a position-size decision you can review later. A larger contract is optional.

Compare HDP discounts
Lucid 30% · Tradeify 30% · TPT 50%.
See current offers ↗Eligible partner plans only.
MNQ vs NQ FAQ
How many MNQ contracts equal one NQ?
Ten MNQ have the same gross dollar-per-point exposure as one NQ: 10 × $2 equals $20 per point. Their separate fills and per-contract fees can produce different net results.
What is the MNQ tick value?
One outright MNQ tick is 0.25 index points and is worth $0.50 per contract. Four ticks equal one point, worth $2 per contract.
What is the NQ tick value?
One outright NQ tick is 0.25 index points and is worth $5 per contract. Four ticks equal one point, worth $20 per contract.
How much is a 100-point move on MNQ?
A 100-point move is $200 per MNQ contract before costs. Multiply that amount by the contract quantity, then apply the trade’s direction and deduct fees.
Is MNQ less volatile than NQ?
One MNQ produces one-tenth the dollar P&L of one NQ for the same point movement. Both reference the same index; reducing the multiplier reduces dollar exposure, not the underlying market’s price movement.
Are the MNQ and NQ charts identical?
Their broad direction is closely related, but separate transactions can produce different last prices and wicks. Match expiry, session, feed timing and chart settings before comparing them.
Is it cheaper to trade ten MNQ or one NQ?
Compare your applicable fee schedule. In the Tradeify example checked October 27, 2026, ten MNQ cost $18.20 round trip versus $5.76 for one NQ. Execution differences and other charges are separate.
How many MNQ fit a $150 budget with a 30-point stop?
Two fit the worked example: each uses $60 price risk, $1.82 round-trip fees and an assumed $2 execution reserve, totaling $127.64 for two. Actual loss can exceed the estimate.
Can I trade NQ on a 50K prop firm account?
Check the plan’s permitted instruments and maximum position, then calculate risk against the current floor and daily boundary. One NQ with a 30-point stop carries $600 of price risk before costs, regardless of the 50K label.
Does lower margin reduce the dollar loss per point?
No. MNQ remains $2 per point per contract and NQ remains $20. Margin changes the amount required to support the position; the contract multiplier determines its dollar price exposure.
Can I analyze NQ and place trades on MNQ?
You can use NQ as an analytical reference while trading an eligible MNQ contract. Verify the matching expiry and MNQ prices, then calculate the quantity and protective orders using MNQ’s multiplier.
Can TradingView place orders from MNQ1!?
TradingView supports CME 1! continuous-contract trading by routing orders to the current front contract. Confirm the resolved contract in the order panel and that your connected broker or program supports it. Trading through 2! is unavailable.
Should I switch to NQ after passing an evaluation?
Recalculate using the funded stage’s rules and current loss room. Passing does not change NQ’s $20-per-point multiplier. Keep MNQ if NQ would exceed the budget or remove partial exits your strategy needs.
Are MNQ and MES the same product?
No. MNQ references the Nasdaq-100; MES references the S&P 500. A comparison of those products concerns different underlying indexes, whereas MNQ versus NQ compares two contract sizes on the Nasdaq-100.
