MES is one-tenth the size of ES. Both are CME futures contracts linked to the S&P 500 Index. One index point is worth $5 on one Micro E-mini S&P 500 contract (MES), compared with $50 on one E-mini S&P 500 contract (ES). Their outright tick size is the same: 0.25 points. That makes one tick worth $1.25 on MES and $12.50 on ES.
The useful comparison starts with the stop your setup needs. An 8-point stop puts $40 at risk on one MES or $400 on one ES before fees and execution differences. If your planned trade budget is $100, one ES already exceeds it. MES lets you choose smaller increments, although buying enough micros eventually creates the same price exposure as a mini.
Margin, commissions and the chart you use add separate decisions. Ten MES contracts have the same dollar sensitivity to an index-point move as one ES contract of the corresponding expiry. They still trade in separate order books, and their complete trading costs need separate calculations.
MES vs ES: contract size, point value and tick value
ES and MES are futures rather than shares in a fund. You enter a contract with a stated expiry and a dollar multiplier. A purchase creates long exposure; a sale can create short exposure. Your profit or loss responds to movement in the futures price, multiplied by the contract value and quantity.
| Specification | MES | ES |
|---|---|---|
| Full name | Micro E-mini S&P 500 | E-mini S&P 500 |
| Point value, one contract | $5 | $50 |
| Outright minimum tick | 0.25 index points | 0.25 index points |
| Outright tick value | $1.25 | $12.50 |
| 10-point price move | $50 | $500 |
| Quarterly month codes | H, M, U, Z | H, M, U, Z |
| Settlement | Financial | Financial |
| Listed quarterly maturities | 5 consecutive quarters | 21 consecutive quarters |
The tick values above apply to an outright futures position. CME also lists smaller increments for calendar spreads and certain other trading mechanisms. Use the outright increment when calculating a normal MES or ES entry and protective stop. A specification for a spread is a different quotation rule.
For a hypothetical futures price of 6,000, one MES has $30,000 of notional exposure: 6,000 × $5. One ES has $300,000: 6,000 × $50. Those figures describe the exposure represented by the contract. They are neither its purchase price nor the amount your broker requires as margin.
The CME contract pages list the current MES specifications and ES specifications, including outright increments, listed maturities and settlement.
Convert points and ticks before comparing a trade
Four outright ticks make one full index point on both contracts. A move from 6,000.00 to 6,000.25 is one tick. A move from 6,000.00 to 6,001.00 is four ticks, or one point. Keeping these units explicit prevents a fourfold error before quantity even enters the calculation.
Twenty MES ticks are 5 points, worth $25 per contract. Twenty MES points are 80 ticks, worth $100 per contract. On one ES, the equivalent values are $250 for 20 ticks and $1,000 for 20 points. Those are gross price differences, before trading costs.
For a long position, subtract entry price from exit price, then multiply by point value and contract quantity. For a short, reverse the price subtraction. A two-contract MES long from 6,000 to 6,006 produces $60 gross: 6 points × $5 × 2. A two-contract MES short from 6,000 to 5,994 produces the same gross amount.
Record the unit alongside every distance in your plan. “Stop 8” can mean 8 ticks, 8 points, or a platform-specific distance field. Eight MES ticks mean 2 points and $10 per contract; 8 MES points mean $40. Confirm the order ticket's unit before using a number copied from a chart or calculator.
An 8-point stop with a $100 risk budget
Assume a hypothetical long setup has an entry at 6,000 and a protective stop at 5,992. The distance is 8 points. The level is chosen from the setup; the example does not recommend that price, an 8-point stop, or a particular percentage of your account.
One MES carries $40 of planned price risk to that stop. Two MES carry $80. Three carry $120 and exceed a $100 budget before adding any costs. One ES carries $400, so the whole-contract result for ES is zero. A platform accepting the order would not change that calculation.
Now include hypothetical costs. Suppose an all-in round-trip fee is $2 per MES, and you reserve one additional adverse execution tick, $1.25 per MES. The planning allowance becomes $43.25 per contract: $40 + $2 + $1.25. Two contracts use $86.50 of the budget; three use $129.75.
These fee figures are assumptions for the arithmetic, not a quote from a broker. The extra tick is an allowance rather than a maximum possible execution loss. A stop-market order can fill further away during a fast move, and a market halt can delay execution. A budget calculation helps choose size; it cannot guarantee the final loss.
The reusable formula is: whole contracts = round down [risk budget ÷ (stop points × point value + round-trip fees + adverse execution allowance per contract)]. Use dollar amounts for every cost term. If your execution allowance is recorded in points, multiply it by the point value before adding it.
The position sizing calculator guide explains how to build that calculation around a valid stop and a whole-contract result. When the result is zero, the setup does not fit the chosen budget at that contract size. Altering the stop simply to make the quantity fit also alters the trade you are evaluating.
Ten MES vs one ES: equal exposure, different trading costs
For the corresponding contract month, 10 MES carry $50 per index point, matching one ES. A 4-point move therefore changes gross value by $200 in either position. This comparison is useful for exposure, but it leaves out what you pay to enter and exit.
Take another explicitly hypothetical fee schedule: $2 all-in round trip for each MES and $5 all-in round trip for each ES. Ten MES cost $20 round trip; one ES costs $5. The same $200 gross move leaves $180 or $195 after those fees, before any additional execution difference.
For an actual comparison, obtain the complete MES and ES rate for your platform, broker and plan. A displayed commission may exclude exchange, clearing, regulatory or routing charges. Check whether the amount is per side or round trip. Two sides make a round trip when the quote is per side.
Spread and slippage also need a consistent convention. If your calculation already uses actual entry and exit fills, the bid-ask effect is embedded in those fills. Adding a second full spread deduction would count the same effect twice. When testing from a chart's reference price, document how you model the spread and adverse fills instead.
Small targets make cost differences easier to see. One MES tick produces only $1.25 gross per contract. Under the hypothetical $2 round-trip schedule, a one-tick favorable move remains negative after fees. That does not establish the results of any strategy; it shows why a target measured only in ticks is incomplete.
The useful performance measure is net expectancy across a tested sample, with the same entry and exit assumptions. Compare trades during similar sessions, include losing trades and partial exits, and keep the cost model visible. The risk-reward ratio guide separates a planned target from the average outcome your records actually support.
MES gives you finer control over scaling and partial exits
The smallest quantity change is one contract. Reducing a MES position by one changes exposure by $5 per index point. Reducing an ES position by one changes it by $50. That difference matters when you want to reduce risk gradually or take a partial exit.
Suppose a five-contract MES position reaches an initial target and you close two contracts. Three remain, so subsequent price movement is worth $15 per point. Confirm that the protective order covers the current three-contract quantity and that any remaining target orders agree with the position.
A partial profit does not, by itself, move the stop on the remaining contracts. The order's price and quantity need to match your intended exit plan. Platform bracket behavior varies: inspect the accepted orders after a partial fill instead of assuming the chart drawing updates the broker order.
Mixed positions also need one exposure calculation. One ES plus two MES in the same direction represents 12 MES units, or $60 per index point. One ES long and 10 MES short of the corresponding expiry may offset much of the directional price exposure, while leaving separate orders, costs and operational obligations.
CME describes a clearing process for eligible offsetting micro and mini positions at a 10:1 ratio, requested through a clearing broker. That is separate from automatic netting in your trading platform. Confirm the handling available for your account before relying on any offset, margin credit or conversion.
Why an MES candle can differ from an ES candle
MES and ES reference the same underlying index, but they are separate traded contracts. Their individual transactions, bid-ask quotes, depth and volume are not one shared order book. The relationship between prices does not require every candle to have an identical high, low or closing print.
This matters for rules that depend on a candle closing beyond a precise level. An MES bar might close a tick above that level while the corresponding ES bar does not. Decide in advance which instrument supplies the signal, and test that rule consistently. Switching to whichever chart confirms the trade introduces a different strategy.
Start a mismatch check with the full contract month. Comparing a December MES contract with a March ES contract adds an expiry difference. Then check timeframe, session template, timezone and data status. A delayed feed or a chart that includes a different session can create a comparison that never measured the same interval.
A continuous chart adds another layer. Back-adjustment and the date a vendor switches the displayed contract can change historical levels. Confirm how the series is constructed before comparing a continuous ES chart with a dated MES chart or using an old annotated level.
You can deliberately analyze ES and execute MES, but make that separation part of the plan. Verify the executable MES contract, its current bid and ask, and the actual order price. ES order-flow data describes ES transactions and liquidity; it does not display resting MES orders.
Neither a volume imbalance nor a small candle difference proves that a reversal will follow. Treat the chosen signal as a rule to test, with realistic fills on the instrument you trade. Avoid turning a broad relationship between markets into a claim that the two feeds must print identically.
Compare liquidity using matched contracts and sessions
Order-book conditions change by time of day and market event. Inspect the current spread and available depth for the specific expiry and quantity you intend to trade. A single screenshot of depth does not establish what will be available when an order reaches the market.
Raw contract counts also represent different amounts of exposure. A daily total of 100,000 MES contracts and 100,000 ES contracts would not describe the same notional turnover. The multiplier differs by ten. Keep that distinction when comparing volume, while recognizing that notional size alone does not measure execution quality.
For a practical comparison, record the contract month, timestamp, session and order quantity. Measure how your actual fills differ from the available quote under the same convention for both products. Include enough observations to cover the conditions in which your strategy trades.
A low per-contract tick value can still become a substantial dollar result when multiplied by many contracts. Ten MES receiving an unfavorable extra tick cost $12.50 in total, matching one extra outright ES tick. Finer size increments help control exposure; they do not remove execution risk.
Margin is the deposit requirement, not your trade budget
Broker intraday margin, exchange-related initial margin and maintenance margin answer different questions. An intraday rate describes the broker's reduced requirement during an eligible trading window. Initial margin concerns opening or carrying the position under the applicable schedule. Maintenance margin concerns the required equity while the position is held.
Read your broker's current schedule alongside its cutoff times and liquidation policy. A reduced day rate may stop applying before the session ends. Volatility adjustments and event-specific requirements can change the amount needed to hold an otherwise unchanged position.
The stop example makes the distinction concrete. An 8-point adverse move on one MES represents $40 before costs, regardless of the margin displayed when the order was accepted. A larger move or an unfavorable fill can exceed that amount. The deposit is not an insurance premium that caps your loss.
Account balance alone also does not select the correct contract. The same balance can support very different exposure depending on stop distance, open positions, broker requirements and the amount you have set aside for trading risk. A fixed rule that everyone above one balance should switch to ES misses those conditions.
Check both constraints independently: can the account satisfy the applicable margin requirement, and does the planned loss fit your risk budget? An order can pass one check and fail the other. Leave capacity for fees and changing equity rather than treating every available dollar as permission to add contracts.
Trading hours, expiry and rolling to another contract
CME lists the regular Globex session for both products from Sunday at 6:00 p.m. through Friday at 5:00 p.m. Eastern Time, with a daily maintenance period from 5:00 p.m. to 6:00 p.m. ET. Holiday schedules can shorten or otherwise change trading hours. Use the schedule for the date you intend to trade.
The futures trading hours guide shows how to use CME's date and product filters, distinguish preopen from matching, and convert the session clock without losing the calendar date.
ET follows daylight saving changes. If you view the session from Taiwan or another timezone, use a timezone-aware calendar rather than keeping one fixed UTC offset throughout the year. The U.S. cash-equity opening time and the futures maintenance break are separate events.
Both products use the March quarterly cycle: March, June, September and December, identified by H, M, U and Z. Current outright specifications state that trading terminates at 9:30 a.m. ET on the third Friday of the contract month. Check the official contract calendar and your broker's earlier handling deadlines.
These contracts are financially settled. You do not receive a basket of S&P 500 stocks when a futures position reaches settlement. Holding through expiry also does not automatically establish a position in the following quarterly contract.
A chart's rollover is a data display event. Rolling an actual position requires the appropriate order process for your account, including closing the existing exposure and establishing the intended new exposure. Review working stops and targets on both symbols so an old order is not left behind.
Compare MES and ES using the same expiry when evaluating their relative prices or using one to inform a trade in the other. The difference between contract months reflects a separate futures relationship, and should not be mistaken for a micro-versus-mini execution discrepancy.
Using MES or ES in a futures prop firm account
A prop firm's displayed account size, remaining drawdown allowance and contract limit are separate quantities. A plan permitting a certain number of contracts does not mean an entry at that quantity fits your available loss capacity. Apply the stop-distance calculation to the risk you actually have available.
Check product eligibility, the firm's micro-to-mini counting rule, aggregate open-position limits and the stage of the account. The exchange's 10:1 exposure relationship does not establish how every evaluation or funded program counts contracts. Company rules can differ even when the futures product itself is unchanged.
Account-level restrictions also operate separately from an individual trade's stop. A trade can remain inside its planned stop while combined positions or a moving account threshold create an account-level problem. Keep the current threshold visible when deciding size; the EOD drawdown guide explains how an account floor differs from a trade exit.

Compare HDP discounts
Lucid 30% · Tradeify 30% · TPT 50%.
See current offers ↗Eligible partner plans only.
A practical MES-versus-ES decision workflow
Write down the exact symbol and expiry, your entry rule, and the price where the setup is invalidated. Convert the resulting distance into index points. Use $5 per point for MES or $50 per point for ES, then add the applicable round-trip cost and your explicit execution allowance.
Divide the budget by that per-contract amount and round down to a whole number. Cross-check the result against margin, current account equity, other open positions and any platform or prop firm limits. If either constraint allows fewer contracts, use the smaller permitted quantity.
Before sending an order, verify the order ticket's symbol, quantity, direction and stop unit. After acceptance, verify the actual working protective order. A chart line or local strategy simulation is useful context, but the accepted order state tells you what the connected account is handling.
After a fill, record gross price P&L, complete fees and the execution difference under your chosen convention. Those records reveal whether smaller MES increments are worth their cost for your setup. A move to ES should follow a tested sizing and execution need, rather than a milestone based solely on balance.
If your next comparison is the Nasdaq contract pair, see MNQ vs NQ. Their dollar multipliers and price movement are different from the S&P 500 pair. Carry over the calculation method, then enter the correct specifications and observed stop distance for that market.
MES vs ES FAQ
What is the main difference between MES and ES?
MES is the Micro E-mini S&P 500 contract at $5 per index point. ES is the E-mini S&P 500 at $50 per point. MES therefore has one-tenth the price exposure per contract, with separate trading costs and an independent order book.
How much is one point on MES?
One full index point is $5 per MES contract. Four outright ticks make one point. Multiply that value by your quantity to calculate the gross effect on a position.
What is the MES tick value?
The outright minimum tick is 0.25 index points, worth $1.25 per contract. Calendar-spread increments differ from the normal outright tick.
What is the ES tick value?
One outright ES tick is 0.25 index points and is worth $12.50 per contract. One full index point is $50.
How much are 20 MES ticks worth?
Twenty ticks equal 5 index points, worth $25 per MES contract before costs. Twenty points instead equal $100 per contract.
Do 10 MES contracts equal one ES?
They have the same dollar exposure per index point for the corresponding expiry: $50. Fees, individual fills and account rules remain separate, so their net outcomes can differ.
Is MES always cheaper to trade?
Its per-contract exposure is smaller. At equal exposure, compare the complete cost of 10 MES with one ES. A lower fee per micro contract does not by itself make the combined position cheaper.
Do MES and ES have identical charts?
They track the same underlying index but trade in separate order books. Individual highs, lows and closing prints can differ. Compare the same expiry, timeframe, session and data settings.
Can I analyze ES and trade MES?
Yes, if that is your defined trading method and the account supports the product. Check the actual MES bid, ask, contract month and accepted order rather than assuming the ES chart is the MES order book.
How much money do I need to trade MES?
You need to meet the current broker margin requirement and have capacity for the trade's planned loss, costs and execution uncertainty. A low intraday margin quote is not a complete trading budget or a loss limit.
When should I switch from MES to ES?
Consider ES when a whole ES contract fits the valid stop, risk budget, margin and account limits, and its execution and costs suit your tested method. There is no universal account-balance threshold.
Are MES and ES available 24 hours a day?
The regular Globex schedule has a daily 5:00–6:00 p.m. ET maintenance break and a weekend closure. Check holidays and broker-specific cutoffs for the date you trade.
Does rolling the chart roll my open futures position?
No. A continuous chart changing its displayed contract does not move the account position. Use the applicable order process and review working orders on the old and new symbols.
Is a prop firm micro limit the same as my risk budget?
No. The contract limit describes an allowance under that firm's rules. Your planned dollar loss also depends on stop distance, quantity, costs, remaining drawdown and other open positions.
