SMC concepts · Inversion fair value gaps
An IFVG, or inversion fair value gap, is an existing fair value gap that fails in its original direction and becomes a candidate for the opposite role. Under the close-based rule used here, a bullish FVG becomes a bearish inversion candidate after a candle closes below its lower boundary. A bearish FVG becomes a bullish inversion candidate after a candle closes above its upper boundary.
The original box stays in the same place. What changes is the direction you are testing: former support may act as resistance, or former resistance may act as support. A close through the box establishes that change under the chosen definition. It does not establish that the next retest will hold, that an order filled, or that a trade has positive expectancy.
This distinction makes the chart much easier to review. Mark the original gap, record the candle that actually confirms its failure, then assess a later return. Keep those events separate even when a finished chart makes them look like one obvious reversal. The fair value gap guide covers the original three-candle geometry, midpoint and fill rules; this article follows what happens after that gap fails.
What changes when an FVG becomes an IFVG?
A bullish three-candle FVG exists when the third candle's low is above the first candle's high. The price interval between those two wick boundaries is the zone. A bearish FVG uses the opposite arrangement: the third candle's high is below the first candle's low. Wait until the third candle closes before treating its final boundaries as known.
That geometry describes non-overlap between the first and third candles. It does not mean that nobody traded at those prices. The middle candle may have traded through the interval. Nor does the shape alone identify an institution's orders or prove that price must return. Those stronger claims cannot be read from a three-candle box.
For an inversion, keep the original upper and lower boundaries unchanged. Suppose a bullish gap runs from 100 to 104 in an abstract price scale. A later close at 99 is below its entire range. Under this guide's rule, that is the bearish inversion event. A close at 102 is inside the range, and a close exactly at 100 is on its edge; neither meets the strict below-boundary condition.
The word IFVG is also used for an implied fair value gap, which is a different construction. Check the expansion of the acronym in an indicator or trading plan. This page uses inversion, inverse and inverted FVG to describe a failed original zone being assessed in the opposite direction. It does not use implied FVG rules.
Use one explicit rule for the inversion candle
The rule here is a confirmed candle close beyond the far edge of the original FVG, against its initial direction. For an original bullish gap with lower boundary L, the inversion condition is close < L. For an original bearish gap with upper boundary U, it is close > U. The equality cases are deliberately excluded.
A wick crossing the far edge while the candle closes inside the box does not confirm an inversion under this rule. You can study a wick-based alternative, but record it as a separate model. Otherwise a losing close-based example can quietly become a winning wick-based example during review, making the results impossible to interpret.
A candle close beyond an edge also differs from requiring the entire candle body beyond that edge. A bar may open inside the box and close below it. That satisfies close < L even though its open remains inside. If your plan requires both open and close outside, add that requirement explicitly and keep its results separate.
Use the timeframe on which the original gap was defined to judge its close-based failure. A one-minute candle closing through a five-minute FVG is information about the lower timeframe; it is not automatically a completed five-minute close. A live five-minute candle can cross the boundary and recover before its close. Record the actual bar-close time rather than the moment the indicator first changed color.
Separate formation, inversion, retest and entry
| Event | What you can establish | What remains unresolved |
|---|---|---|
| Original FVG forms | Three closed candles define the original wick boundaries. | Whether price returns or the zone supports its initial direction. |
| Inversion confirms | A later candle closes beyond the far edge against the original bias. | Whether a later return holds as the opposite role. |
| A later bar retests | Its high-low interval overlaps the unchanged zone. | Whether your chosen rejection or entry condition is satisfied. |
| Entry condition occurs | Your specified signal or order condition is present. | Actual fill, slippage, subsequent path and final trade outcome. |
| The inverted zone fails | Price meets your predefined failure condition. | The result of any trade, which depends on its own entry and exit orders. |
A common source of confusion is calling every visit to the rectangle an entry. A limit at the near edge, a limit at the midpoint, a market order on the inversion close and a market order after a later rejection close are different execution models. They can create different fill rates, stops and outcomes on the same sequence of candles.
For the retest example in this article, price must return on a later closed bar, overlap the zone and close back outside in the inversion direction. A bearish IFVG therefore needs a later overlapping bar that closes below L. A bullish IFVG needs a later overlapping bar that closes above U. This is one explicit study model, not a universal definition of every IFVG trade.
If the inversion and apparent retest both occur inside one candle, ordinary OHLC data may not establish their intrabar order. The high and low show the range, not the complete path. Use finer data to study that sequence, or classify it as unresolved. A finished candle does not tell you whether the boundary break occurred before or after the apparent return.
Bearish IFVG example: a bullish gap loses support
Assume a confirmed bullish FVG has boundaries 100 and 104. These are hypothetical units, not prices from a recorded market trade. Bar 4 trades down to 98 but closes at 102. The wick has crossed the lower boundary, yet the close remains inside. The original zone has been penetrated; the chosen inversion rule has not triggered.
Bar 5 closes at 99. This is the first confirmed close below 100, so the same 100–104 interval becomes a bearish inversion candidate. Keep the original boundaries. Moving the upper edge down to fit bar 5 would create a different zone and make the later retest appear cleaner than the rule actually produced.
Bar 6 then has a high of 102, a low of 98 and a close of 99. Its interval overlaps 100–104 and it closes below 100. That meets the later-bar retest and rejection condition. It does not tell you that a limit at 103 filled: the high only reached 102. A midpoint limit at 102 has its own fill assumptions, while a close-based market entry would occur after the bar finishes.
Consider the losing alternative as carefully. If bar 6 instead closes at 105, the same zone has failed the chosen bearish role after inversion. If it closes at 103, the retest occurred but the required rejection close has not. These are different states. Keeping them distinct prevents an indicator touch from being counted as a confirmed setup.
Bullish IFVG example: a bearish gap loses resistance
Now assume the original 100–104 zone is a confirmed bearish FVG. A candle closing at 103 remains inside it. A candle closing exactly at 104 reaches the upper boundary without exceeding it. Under the strict rule, the bullish inversion occurs only when a later candle closes above 104, for example at 105.
After that inversion closes, suppose the next bar trades between 102 and 106 and closes at 105. The range overlaps the original zone, then the bar closes above its upper edge. That meets this guide's bullish retest confirmation. A candle with the same range but a close at 103 is an overlapping retest without the required close back above.
A later close below 100 fails the chosen bullish role. An actual protective stop may trigger earlier than that close. If the trade's stop is at 101, a wick to 100 can stop the position even if the candle later closes at 105. Zone classification and trade risk are separate records; a surviving bullish IFVG is not proof that every attempted long survived.
Price may also continue upward without returning to the box. A retest-only model records that as unfilled or skipped, according to its order rules. Entering later at a much higher price produces another reward-to-risk profile. Keep the missed move in the journal rather than retroactively treating the original gap as a guaranteed entry.
Check an IFVG sequence with your own bar data
Use this manual checker to distinguish a confirmed inversion from an inside close, an unordered same-bar return and a later retest. Start with your already identified three-candle FVG. Enter its original direction and unchanged boundaries. Bar 3 is the original gap's confirmation bar; use later relative bar numbers for the inversion and retest.
The checker does not identify gaps from a chart, connect to a data feed or send orders. Its prices are abstract positive values with up to four decimal places. Leave a price blank when it is unknown. Tick the confirmation boxes only after checking the original gap, analysis timeframe and completed candles yourself. A classification is a description of your inputs, not a trade recommendation or a fill report.
Manual IFVG sequence checker · No market connection
Blank values stay unknown. Boundary equality is not a strict close-through. Retest overlap includes an exact boundary touch. This classifies your record only: no chart detection, order submission, entry approval, stop/target outcome or expectancy calculation. Inputs reset on reload.
For the bearish example, select an original bullish FVG, lower 100, upper 104, inversion close 99 on bar 5, then retest high 102, low 98 and close 99 on bar 6. Confirm the original gap, same timeframe and both completed bars. The result should describe a bearish inversion with the chosen later retest confirmation.
Change only the retest bar number to 5. The apparent return now shares the inversion bar, so the checker cannot establish the required later-bar sequence. Change it back to 6 and leave the retest close blank: the inversion can remain confirmed, but retest confirmation is unknown. These differences matter more than the color of a rectangle.
Choose context before adding IFVG confluences
An inversion can occur in the middle of a range, near a range extreme or against a larger directional move. The same box is therefore not a complete trading plan. Define the market, session, timeframe, higher-timeframe reference and allowed direction before scanning for failed gaps. The SMC learning guide places gaps alongside structure, liquidity and risk sizing.
A sweep can provide a reason to watch for a reversal, but the sequence still needs checking. Mark the reference high or low before price reaches it, record the excursion and recovery, then assess the inversion. The liquidity sweep examples distinguish taking a level from confirming a reversal. A high being exceeded does not by itself prove that the next bearish gap will hold.
Some traders add relative-market divergence. If you use SMT divergence, specify the pair, matching swing and observation window. The divergence must be visible when the entry decision is made. Selecting a more convenient comparison market after the reversal introduces information that was not part of the original decision.
Session filters need the same discipline. Define an actual time window and use a timezone that follows the intended daylight-saving convention. The ICT killzone reference covers session timing. A New York local-time rule should not silently become fixed EST throughout the year. Context narrows the cases you study; it does not turn an IFVG into a certain reversal.
Keep the entry, protective stop and target measurable
A break-close entry participates as soon as the inversion candle finishes. A later-retest entry waits for a return and may never trade. A rejection-close entry waits longer still and uses a price that may already be outside the box. Select one model before collecting results, including the earliest order submission time and the treatment of missed fills.
For a hypothetical bearish rejection-close entry at 99 with a protective stop at 105, price risk is 6 units before fees and slippage. A target at 87 offers 12 units, or a nominal 2R. That arithmetic describes the planned distances. It does not predict a win, and it does not establish whether the actual market permits those exact prices or contract sizes.
Convert the planned stop distance into money using the instrument's point or tick value, then choose a position size that fits the separate risk budget. Include commission and an explicit slippage assumption. If a feasible size cannot fit the stop and risk budget, record a skipped trade. Redrawing the zone or tightening the stop only to make the desired size fit changes the tested model.
If one OHLC bar touches both the stop and target, the bar alone may not establish which order was hit first. Keep the outcome ambiguous, use sufficient intrabar data, or apply a conservative rule chosen in advance. Counting every ambiguous bar as a target hit can produce an attractive result without evidence of an executable path.
Read indicator settings as separate detection and signal rules
An indicator may filter original gaps by size, limit the number of displayed zones and choose wick-based or close-based retest signals. Those settings answer different questions. A size filter changes which original gaps enter the sample. A signal preference changes a later trigger. A display limit can hide older examples without changing how those examples originally formed.
For example, LuxAlgo's IFVG description requires a price close through the original FVG to produce the inversion. Its Wick or Close Signal Preference applies to retest signals. Reading “Wick” in that setting as permission for a wick-only initial inversion would mix two stages of the tool's logic.
The same description explains that associated zones, lines and signals are removed after an inverted zone is mitigated. A finished chart showing only surviving zones is therefore not a complete record of every candidate that appeared earlier. Save a chart snapshot or a bar-by-bar log at the decision time, including later failures and zones that disappear.
Check the actual script version, timeframe behavior, settings and alert timing before using alerts in a study. A screenshot of another person's indicator does not establish your settings. An alert appearing during a live candle also differs from an alert confirmed at its close. Keep the rule you trade written outside the indicator so that a visual change cannot silently rewrite the test.
Distinguish IFVGs from BPRs and broader reversal models
An inversion starts with one original FVG that fails under the selected rule. A balanced price range, or BPR, is defined from the overlap of opposing gaps. A new opposing FVG may appear during the move that breaks the old one, but that is an additional geometric condition. An IFVG can be studied without inventing a second gap or a BPR where no overlap exists.
A breaker block uses a different original reference, involving the failure of a block and the surrounding structure. The concepts can occur near one another without being interchangeable. Label each zone from its own construction. Calling every failed rectangle an IFVG loses the original three-candle gap requirement.
An IFVG can also be one trigger inside a larger reversal model involving a sweep, structure shift, session filter or relative-market divergence. That model needs its own entry, invalidation and target rules. A description of a trader's particular New York index-futures setup should not become a universal requirement for every market and timeframe using the term IFVG.
Journal the failures and the opportunities that never fill
Record the original gap's formation time, timeframe and exact boundaries before the inversion. Then record the first qualifying inversion close, the later retest, the selected entry rule and the information available at that moment. Keep the original measurements even when a later bar creates a prettier alternative zone.
Include gaps that fail immediately, candidates that never retest, inside closes without confirmation, live-bar signals that disappear and retests outside the allowed session. Separate a missed limit from a stopped trade. Both affect a strategy, but they are different observations and should not be forced into one win-rate denominator.
Measure net results after costs, drawdown, losing streaks, fill rate and sensitivity to reasonable parameter changes. A short sequence of clean examples demonstrates how a rule works; it does not establish a durable edge. Keep a later sample separate from the period used to choose filters, so that the next test evaluates the written model rather than another round of retrospective adjustment.
For a prop firm evaluation, apply the account's current drawdown, position and payout conditions as an additional layer. The same chart setup can fit one risk budget and exceed another. A strategy label does not change those limits, and a valid IFVG classification does not establish that a proposed order complies with them.

Compare HDP discounts
Lucid 30% · Tradeify 30% · TPT 50%.
See current offers ↗Eligible partner plans only.
Questions about IFVG trading
What does IFVG mean in trading?
Here IFVG means inversion fair value gap: an original FVG that fails and becomes a candidate for the opposite role. Some material uses the acronym for an implied fair value gap, so check which construction the author or indicator means.
What is the difference between FVG and IFVG?
An FVG starts as a three-candle non-overlap zone. An inversion FVG uses that existing zone after its original direction fails. Under this guide's close-based rule, the failure requires a confirmed close beyond the far boundary against the original bias.
What confirms a bearish IFVG?
A confirmed bullish FVG becomes a bearish inversion candidate when a later completed candle on its analysis timeframe closes strictly below its lower boundary. The box stays in place. A later retest and an actual trade entry are separate events.
What confirms a bullish IFVG?
A confirmed bearish FVG becomes a bullish inversion candidate when a later completed candle on its analysis timeframe closes strictly above its upper boundary. A close inside the box or exactly on its upper edge does not meet this strict rule.
Can a wick alone create an IFVG?
Not under the close-based inversion rule used here. Wick-based alternatives exist, and some indicators offer wick-based retest signals. Keep initial inversion detection separate from the later signal preference when reading settings or comparing results.
Does the whole candle body need to close beyond the gap?
This guide requires the closing price beyond the far edge, not the entire body. A bar opening inside and closing outside can qualify. Requiring both open and close outside defines a stricter alternative that should be tested separately.
When do you enter an IFVG trade?
The entry depends on the written model. An inversion-close entry, an edge or midpoint limit on a later return, and a later rejection-close entry have different timing and fill assumptions. Choose the model before measuring its outcomes.
Can the inversion and retest occur on the same candle?
They may appear inside one candle, but ordinary OHLC data may not establish the intrabar sequence. The checker requires a later retest bar. Use sufficient finer data if your model depends on a break and return within the same candle.
What invalidates an inverted fair value gap?
In the chosen close-based model, a bearish inverted zone fails on a close above its upper edge; a bullish inverted zone fails on a close below its lower edge. An actual trade's protective stop can trigger before that zone-level close occurs.
Is IFVG the same as a balanced price range?
No. An inversion studies the failure of one original FVG. A BPR requires an overlap of opposing gaps. Both may occur near the same move, but the second gap and its overlap must exist before calling the area a BPR.
What is the best IFVG timeframe?
There is no demonstrated universal best timeframe in this guide. Define the market, session, data quality and execution model, then test them. Judge a gap's close-based inversion on its chosen analysis timeframe rather than substituting a lower-timeframe close.
Does an IFVG guarantee a reversal?
No. The zone can fail after inversion, never retest or produce a losing trade. A confirmed pattern describes price geometry and timing; it does not establish future direction, institutional participation or a profitable trading edge.
Why can an IFVG indicator remove old zones?
Some indicators remove an inverted zone and associated signals after mitigation or failure, and may also limit displayed history. Save decision-time records and review the particular script's rules. Surviving historical drawings alone are not a complete opportunity sample.
Does the IFVG checker identify or execute trades?
No. It classifies the original zone and bar data you manually enter using the stated close-based rules. It preserves missing values as unknown and does not verify a real gap, market feed, order fill, protective stop, profit or prop firm compliance.
