The ICT OHLC model studies how a larger candle may develop from its opening price. OHLC means Open, High, Low and Close; OLHC means Open, Low, High and Close when the letters describe a proposed price sequence. Ordinary OHLC data records four values. It does not, by itself, record the order in which the high and low occurred.
That distinction matters when you move from a finished candle to a trading decision. A green candle tells you that its close exceeded its open. It does not prove that its low formed first, that buying below the open was profitable, or that a target was reached before a stop.
Use the opening price as a defined reference, examine the developing candle on an appropriate smaller interval, and keep the entry and invalidation rules separate. The examples below use constructed prices so you can check the relationships without treating a selected historical winner as evidence of a dependable strategy.
Read the four prices before assigning a story
A completed candle summarizes a particular interval on a particular data series. Its open is the first recorded price for that bar, its high and low are the extremes, and its close is the final recorded price. The instrument, feed, timeframe and session settings belong with those values.
On a conventional candlestick, the body runs between open and close. The upper wick extends to the high, and the lower wick extends to the low. An OHLC bar presents the same four values with a vertical high-to-low line, an opening tick on the left and a closing tick on the right. Changing the drawing does not add a missing timeline.
Take a constructed candle with open 100, high 112, low 94 and close 108. The close is above the open, so it is an up candle under the usual open-versus-close convention. The body spans eight points, while the full high-to-low range spans eighteen.
| Measurement | Calculation | Meaning in this example |
|---|---|---|
| Body | 108 − 100 = 8 | Distance between opening and closing prices |
| Full range | 112 − 94 = 18 | Distance between the recorded extremes |
| Upper wick | 112 − 108 = 4 | High above the body |
| Lower wick | 100 − 94 = 6 | Low below the body |
| Range midpoint | (112 + 94) ÷ 2 = 103 | Halfway between the high and low |
| Body midpoint | (108 + 100) ÷ 2 = 104 | Halfway between the open and close |
The two midpoints are different prices. A rule using the midpoint of a body tests something different from a rule using half of the full range. Identify the reference before drawing an equilibrium line or comparing it with another trader’s chart.
OHLC data and an OHLC path are different things
In a price-data file, the column order Open, High, Low, Close is a naming convention. It does not mean that every bar reached its high before its low. Both a bullish and a bearish candle can contain several trips above and below the open.
In ICT-related teaching, OHLC is also used to describe an anticipated open-to-high-to-low-to-close path. OLHC describes an anticipated open-to-low-to-high-to-close path. When someone says “I am looking for OLHC,” ask which candle they are discussing and what would support that expectation before the candle finishes.
In TTrades’ OHLC and OLHC lesson, the anticipated destination, or draw on liquidity, supplies the directional context. His bullish examples look for an initial low and later upward expansion; his bearish examples look for an initial high and later downward expansion. He studies these relationships across weekly, daily and four-hour candles.
That is a proposed development path under a particular reading of context. A finished green candle is not sufficient evidence that the proposed sequence occurred. The Smart Money Concepts guide connects the broader vocabulary; here, the narrower task is to separate recorded prices from a sequence you still need to verify.
The same bullish candle can contain opposite sequences
Return to open 100, high 112, low 94 and close 108. One possible path is 100 → 94 → 112 → 108. The low occurs before the high, matching the OLHC ordering. Another possible path is 100 → 112 → 94 → 108. The high occurs first, yet the candle still closes above its open.
Both paths produce the same body and wicks. Neither requires an error in the data. The four-price summary has simply discarded some information about the movement inside the interval.
Now suppose a hypothetical long position is already open at 100 at the start of that interval. Its stop at 96 and target at 110 are already active. For this exercise, assume a continuous price path, no gaps, exact execution at the first crossed exit, one unit worth $2 per point, and $2 in total round-trip costs.
| Constructed path | First active exit | Result under the stated assumptions |
|---|---|---|
| 100 → 94 → 112 → 108 | Stop 96 | (96 − 100) × $2 − $2 = −$10 |
| 100 → 112 → 94 → 108 | Target 110 | (110 − 100) × $2 − $2 = +$18 |
These are alternative arithmetic examples, not two observed trades or a backtest. The position exits at the first active boundary under the assumptions. In the low-first path, the later move to 112 cannot rescue a position that already stopped at 96. In the high-first path, the later fall to 94 happens after the target exit.
If you change the entry to an order submitted later in the candle, the question changes again. A target touched before that entry becomes eligible cannot be counted as the trade’s profit. Record when each order existed, rather than checking whether the finished bar contains attractive prices.
See how smaller bars build a larger candle
For ordinary time aggregation, take the first child bar’s open, the highest high across the included bars, the lowest low, and the final child bar’s close. The child candles can have different colors. A sequence containing both up and down bars can finish as one larger up candle.
Consider three consecutive five-minute bars in a constructed fifteen-minute interval. The first has O100, H104, L94, C102. The second has O102, H112, L101, C110. The third has O110, H111, L106, C108. Together they form O100, H112, L94, C108.
In this arrangement, the final low of 94 belongs to the first child bar and the final high of 112 belongs to the second. Their order is established across those two child bars. The fifteen-minute candle alone does not show that information.
Smaller bars do not always resolve the question completely. If both relevant levels fall inside one five-minute bar, that child bar still records only its own open, high, low and close. You may need finer observations, or you may have to keep the sequence unresolved in the record.
Also keep the interval boundaries fixed. Three bars beginning at 09:00, 09:05 and 09:10 describe a different observation unit from three beginning at 09:05, 09:10 and 09:15. These are example clock labels, not a prescribed trading session. A conveniently selected run of candles is not automatically the platform’s existing fifteen-minute bar.
A developing wick is still developing
During a forming candle, the open remains its starting reference, while the running high, running low and latest price can change. The final close is unavailable until that interval ends. An apparent lower wick can extend later, and a candle that looks bullish midway through its life can close below its open.
This creates a practical difference between saying “price has moved below the open” and saying “the low of this candle is complete.” The first describes an observation. The second makes a claim about the remaining interval.
A study plan might wait for price to reclaim a previously marked level and then require a completed close through a selected swing. That gives you an event you can timestamp. It still does not guarantee that the earlier low will hold. The BOS, CHoCH and MSS guide explains the structure convention separately.
Freeze a screenshot at the decision time. Mark the running extreme as the low known so far, rather than relabeling it with the certainty of the finished candle. If the price later makes another low, that belongs in the outcome. It should not disappear because a cleaner example was available elsewhere.
Choose which opening price your rule uses
A chart candle’s open belongs to the interval and data series that created it. A New York midnight reference belongs to a specified clock time. An exchange or cash-session opening belongs to that market’s schedule. These references can serve different purposes, so record the one your model actually uses.
TTrades’ daily illustration uses a midnight opening reference. Copying that line onto another instrument does not establish that it equals the opening price of your broker’s daily candle. Keep the symbol, feed, session selection, reference time and date with the chart.
TradingView’s time documentation distinguishes the displayed chart clock from the exchange time zone used by default in Pine time calculations. Changing the displayed time zone does not change a script’s calculations. Regional identifiers such as America/New_York account for daylight-saving changes; a fixed UTC offset stays fixed.
The ICT killzone times guide covers the dated clock conversion in more detail. For OHLC practice, the useful habit is simple: write the parent candle’s opening and closing timestamps before examining its smaller bars. Keep the opening reference as another explicit field.
Connect candle formation with PO3 and daily bias
Power of Three, also called AMD, organizes a study into accumulation, manipulation and distribution. An opening range, an excursion and a later expansion can help describe the development of a larger candle. The labels are a framework for the selected sequence, rather than measurements of an institution’s private orders.
A bullish example can involve an initial range near the open, a lower excursion and an upward expansion. A bearish example can involve a higher excursion before a downward expansion. Some days remain in a range, continue through the proposed reversal area or produce several competing excursions.
The PO3 and AMD guide covers the complete range, reclaim, confirmation and entry exercise. Keep that full sequence distinct from merely noticing a wick. A lower-timeframe excursion may become part of a higher-timeframe wick, but its later appearance does not prove that a qualifying entry existed beforehand.
Daily bias asks another question: which directional objective will you examine on the next day or session? The daily bias guide separates the hypothesis, target-touch test and actual trade result. Reaching a daily high, closing as a green candle and reaching a trade target before its stop are three different outcomes.
Use candle shape as a description
A directional candle has a relatively prominent body under the convention being used. A reversal-shaped candle may have a pronounced wick and close away from an extreme. An indecision-shaped candle has a small body relative to its range. Specify any thresholds if those descriptions become part of a test.
Our 100–112–94–108 example has an eight-point body within an eighteen-point range. Calling that “strong” without defining the comparison leaves the rule open to interpretation. You could compare it with its own range or with preceding candles, but those are different filters that need separate definitions.
The context matters too. A large up body can be a continuation, a rebound inside a larger decline, or the last move before a reversal. A small body records a close near the open; it does not demonstrate an equal number of buyers and sellers or identify their intentions.
Distinguish the full range midpoint from a body midpoint, and a body midpoint from an order-block validation rule. A specialized lesson may assign a role to one of those prices. That does not turn the role into a universal property of every candle or every OHLC model.
Read simulated fills as simulated fills
A backtesting engine needs an execution policy when the available data does not specify the internal sequence. TradingView’s broker-emulator documentation explains that its default historical path assumptions depend on whether the opening price is closer to the high or low. Those are emulator assumptions, not a recovered tape of actual trades.
Higher historical detail can use lower-timeframe bars where available. Missing intrabar coverage can leave default assumptions in use. Check the configuration and data coverage before treating a same-bar entry and exit as established execution history.
Apply that distinction to the constructed stop-and-target example. If you have only O100, H112, L94 and C108, your data supports both shown paths. A simulation can choose one according to its policy. Your research notes should identify that policy instead of calling the selected outcome a directly observed fact.
Costs and execution remain separate inputs. The $2 point value and $2 round-trip cost in this article are invented arithmetic assumptions. A real instrument requires its own specifications and trading costs. A profitable simulated path does not establish that an order could obtain the same price or quantity in live conditions.
Turn the reading into a repeatable exercise
Choose one parent interval and one observation schedule. Before revealing its later prices, record the opening reference, directional hypothesis, proposed objective and conditions that would cancel it. Then record the exact smaller-bar event needed before an order can be submitted.
Keep windows with no signal, valid orders that never fill, executed trades and unresolved event sequences separate. An unfilled order is not a losing trade. A profitable move that occurred before eligibility is not a missed fill that can be added to the result.
Start with a consecutive block of dates, preserve the unsuccessful examples and use another block when checking a rule developed from the first. Compare the actual definitions, rather than changing the opening reference whenever another line makes the chart look cleaner.
The original OHLC and OLHC practice worksheet includes the equal-candle example and fields for the parent interval, running extremes, eligibility time and outcome. It is a practice record, not an official course download or a claim about model performance.
If you later use the plan with a PropFirm, compare its holding duration, open-position risk and permitted loss with that account’s current conditions. A chart pattern cannot override the account rules, and the advertised balance is not the amount available to lose.

Compare HDP discounts
Lucid 30% · Tradeify 30% · TPT 50%.
See current offers ↗Eligible partner plans only.
Frequently asked questions
What does OHLC mean in ICT trading?
OHLC names Open, High, Low and Close. ICT-related lessons also use the letters to describe a proposed opening-to-high-to-low-to-close development path. State whether you mean recorded data or an anticipated sequence; a four-price summary alone does not establish that sequence.
What is the difference between OHLC and OLHC?
As path labels, OHLC puts the high before the low, while OLHC puts the low before the high. In an ordinary data table, OHLC is simply the conventional name for the four values, regardless of which extreme occurred first.
Does a bullish candle always form its low first?
No. Both 100 → 94 → 112 → 108 and 100 → 112 → 94 → 108 finish with the same bullish candle. The close exceeds the open in both cases, but their high and low occur in a different order.
Can a bearish candle reach its low before its high?
Yes. For example, a constructed path of 100 → 90 → 106 → 95 closes below its opening price despite reaching the low before the high. Candle direction compares close with open; it does not determine intrabar chronology.
Is buying below the opening price an entry rule?
It specifies a price relationship, but a complete plan also needs context, eligibility, order type, invalidation, size and exit conditions. Price can remain below the open or continue falling. The relationship alone does not establish an executable or profitable model.
Which open should I use for the daily OHLC model?
Use the reference defined by the selected lesson or rule. A chart daily-bar open, a New York midnight reference and a market-session open can differ. Record the instrument, feed, session settings, date and clock rather than assuming every line called daily open is identical.
Can I study OHLC on four-hour and smaller candles?
Yes. Define the parent interval and examine the smaller bars inside it. The final high, low and close are still unknown while the parent candle forms. Changing the interval changes the observation unit and may change which signals qualify.
Do smaller candles need the same color to form a larger candle?
No. Ordinary time aggregation uses the first open, maximum high, minimum low and last close across the included interval. A specialized model may group same-direction candles for another purpose; that is a separate rule from standard time aggregation.
How is the OHLC model related to PO3?
PO3 describes an accumulation, manipulation and distribution framework. A proposed lower or upper excursion followed by expansion can help interpret a larger candle’s development. A finished wick alone does not establish the entire PO3 entry sequence or reveal institutional intentions.
Can OHLC data tell whether the stop or target came first?
Not always. If both levels sit inside a bar’s range, the four recorded values may support different event sequences. Inspect finer data or retain the ambiguity. A backtesting engine’s assumed ordering should be identified as an assumption.
Does lower-timeframe data always resolve the sequence?
No. It resolves some ordering across smaller bars, but a single child bar can still contain both relevant prices. Data coverage, interval boundaries and the precision required for the decision determine whether further detail is needed.
Is the body midpoint the same as range equilibrium?
Not necessarily. With O100, H112, L94 and C108, the body midpoint is 104 and the high-to-low midpoint is 103. A rule must identify which pair of prices defines its midpoint before you compare reactions or results.
What is the win rate of the ICT OHLC model?
The label does not define one complete test. A meaningful result needs a specified model, observation period, instrument, execution policy and costs. The constructed examples here demonstrate information and arithmetic; they do not supply a measured win rate.
Is the free worksheet an official ICT course PDF?
No. It is Yang’s original practice sheet for the examples and recording process in this guide. It does not reproduce a paid course. Use the original educator’s material for the chosen model, and retain your own decision and execution records.
